Wet Kitchens
- EVA edge sealing (critical for water exposure)
- Raised base cabinets (100mm legs)
- rusting-resistant hardware
- Ventilation planning (exhaust fan/hood recommendations)
What "Premium" Means Here
Premium is not a marketing term; it is an engineering requirement. It demands materials explicitly specified to withstand Brunei's continuous humidity index.
Every specification in this document is selected to resist humidity, last longer, and perform better in tropical conditions.
We publish our build standard openly because we stand behind it. Download this document, bring it to showroom visits, and compare properly.
Core Specifications
Board Materials
Carcass (Standard): 18mm Solid Plywood (High-Pressure HPL Surfaced)
Verification: Layered veneer core for superior screw-holding (See: Humidity Physics Report)
Door Finishes: Formica, Thermal-Cured Lacquer, PET, or PETG
Edge Sealing
Method: EVA (Ethylene-vinyl acetate) hot-melt adhesive at 180°C-190°C
Why: Waterproof bond, resists steam/heat/chemicals, doesn't peel like PVC tape
Application: All exposed edges on doors, drawers, panels, shelves
Drawer Slides
Kitchens: Blum TANDEM concealed or HIGOLD Diamond series (up to 70kg rating)
Wardrobes: Heavy-duty DTC 3-joint or HIGOLD Shearer series (aerospace aluminum)
Warranty: 1-Year Universal Hardware Warranty
Hinges
Type: European-style concealed hinges (Blum CLIP top or HIGOLD premium)
Finish: Nickel-plated or stainless steel (SS304 standard for wet areas)
Features: Soft-close damping, 3D adjustment, 50,000+ lifecycle certified
Drawer Boxes
Material: 18mm HPL-surfaced Solid Plywood (Full Seal)
Joinery: Pocket-bolt or screw joints for rigid construction
Sealing: EVA edge sealing on all exposed edges
Full HPL (High-Pressure Laminate)
What it is: HPL is a durable, moisture-resistant surface bonded to the board.
Why it matters: Provides superior protection against humidity, scratches, and impacts compared to melamine or paper-faced boards.
Application: Used for carcasses, drawer boxes, and sometimes door finishes for maximum durability.
Base Cabinets
Legs: Adjustable plastic legs (100mm minimum height)
Kickboards: PVC or aluminum (not MDF wrapped in vinyl)
Protection: Drip edges on countertops, floor protection measures
Regulatory Adherence
Permits: Our installation process is strictly governed by ABCi & BusinessBN guidelines for residential structural integrity.
Safety: Low-VOC, ENF-grade materials for indoor air quality.
Our local Brunei workshop leverages CNC precision cutting and high-temperature EVA edge sealing to ensure every cabinet meets our tropical durability standard.
How We Build It
1. Site Measurement
We visit your home to take precise measurements, noting wall straightness, floor levels, and electrical points.
Output: Accurate 3D designs of your space.
2. Design Approval
We finalize the layout, discuss materials and finishes, and ensure everything matches your functional requirements.
Output: A clear, final quote and timeline.
3. Precision Fabrication
Your cabinets are cut with high accuracy using advanced machinery, ensuring a precise fit.
Output: Precisely sized components ready for sealing.
4. Heat-Sealed Edges
Every exposed edge is securely sealed at 180°C - 190°C, locking out moisture and preventing peeling.
Output: Durable, waterproof cabinet panels.
5. Quality Check
We carefully inspect each piece and install the hardware before it ever leaves our workshop.
Output: Completed cabinetry ready for your home.
6. Final Installation
Our in-house team installs your kitchen, leveling everything and leaving the space clean.
Output: Your completed project, guaranteed for a full year.
Timeline & Warranty
Typical Project Timeline
| Site measurement & concept | 1-3 days |
|---|---|
| Design finalization & quote | 3-7 days |
| Fabrication (post-confirmation) | 10-14 weeks* |
| Installation | 2-7 days* |
*Depends on project size and complexity
Warranty
Workmanship: 1 year from installation date
Coverage: Defects in fabrication, installation errors, hardware malfunction under normal use
Exclusions: Damage from accidents, misuse, alterations by third parties, or failure to follow care instructions
Service Response: 2 business days for assessment
Climate & Moisture Protection
Dry Areas (Wardrobes, Dry Kitchens)
- Standard moisture protection (EVA edge sealing)
- Regular hardware (DTC or Blum depending on tier)
- Climate-appropriate finishes
High-Moisture Exposure Areas
- Moisture-resistant plywood or aluminum carcass
- Stainless steel or high-rusting resistant hardware
Continue Exploring
Financing Options
Split your kitchen or wardrobe project into 12-36 monthly payments through BIBD At-Tamwil.
Explore financing →Customer Feedback
What Brunei homeowners say about their Caramella kitchen and wardrobe projects.
Read reviews →Franchise vs Custom
How locally-fabricated CNC cabinetry compares to imported franchise kitchen systems.
Read comparison →Pricing Guide
Transparent price ranges for kitchens, wardrobes, and built-in cabinetry in Brunei.
View pricing →Initiate Project Scoping
Submit your specifications to receive a technical estimate governed by the transparency mandates in this standard.
Response time: Within 1 business day